The Best Pool Pumps In Australia

The perfect pool pump is one that is dependable, efficient, and simple to operate. It is an important component of your pool system since it draws water from the pool and into the filtration system, ensuring that you have clean, clear water at all times.

Choosing a pool pump might be difficult with so many options available. The buyer’s guide and reviews below should help you identify the most important characteristics to look for.

1. Best Overall: Onga Leisuretime 1.0HP Pool Pump

The Onga pool pump combines excellent performance with a reasonable price. The pump may be used as a solar heating pump for household swimming pools (including in-ground pools) ranging in size from 20,000 to 90,000 litres.

The self-aligning barrel unions make it simple to connect pipes, so you can have the unit up and running quickly. The raised mount keeps moisture away from the motor, and the corrosion-resistant cover helps to extend the motor’s life.

You don’t have to open the hair and lint pot to check if it needs to be emptied because it has a transparent lid. The lint pot also has the advantage of not requiring the use of tools to tighten or remove the cover.

2. Giantz Swimming Pool Pump Water 2000W 2.7HP

The Giantz pump may be used in both in-ground and above-ground pools and can handle both salt and chlorine water. It’s a wonderful all-around pump that’s long-lasting, efficient, and affordable.

It’s simple to set up, cleans the pool as it pumps, and has a high flow rate that allows a 60,000L pool to be refreshed in under three hours. The detachable filter will keep your pool water clean and clear at all times thanks to its huge object separation.

This pump features a copper motor with a high conductivity, which means it produces less heat, is energy efficient, and is very quiet. The enclosure is watertight, corrosion-resistant, and has a rapid drain stop.

3. Astral Viron P320XT Variable Speed Pool Pump

The Viron XT allows you to configure the speed to fit the pump’s intended purpose; there are three preset settings that are suitable for most pools and can be readily modified as needed. The low-speed option is the ideal choice if you want the pump to run quietly late at night or early in the morning.

The pump is high-performance and energy-efficient, with a 9-star efficiency rating that may save you over $1,000 a year in running costs. There is also an integrated timer that allows you to configure up to four time periods each day with different speed settings for added convenience.

Because the strainer basket’s cover is see-through, you can readily see when it needs to be emptied. The RPM is clearly displayed on the display, allowing you to make changes as needed.

4. Onga SuperFlo VS 800 Energy Efficient Pool Pump

The Onga SuperFlo is a simple to use, quiet, efficient, and dependable pump. You may customize the settings to meet your specific filtration and cleaning requirements.

The variable speed pump has three settings and an override feature, allowing you to select the most efficient speed for your needs. The user interface is simple and intuitive. The plumbing unions are quick-connect, and the top can be removed easily for cleaning.

To prevent damage, the motor is fault protected, and the hydraulic design assures excellent performance, energy economy, and pump life. The structure is long-lasting and designed to resist any weather. Because the filter trap is big, you will have to empty it less frequently.

5. Davey Powermaster PMECO 3 Speed Pool Pump

The Davey Powermaster is a three-speed pump with a small design that lets you move between filtration, cleaning, and sanitizing your pool.

Eco flow, mid-flow, and high-flow are the three modes. Eco flow has the slowest speed and uses the least amount of energy. Pool filtration is best with eco flow, pool cleaning is best with mid-flow, and pool sanitization and heating is best with high flow.

Because the pump is silent when running, it may be used at any time of day or night. It is totally programmable, has minimal energy costs, and emits little pollutants. Because of the see-through cover and extra-large leaf basket, it’s simple to see when the filter needs to be cleaned, and you can go longer between emptyings.

A Buyer’s Guide to Pool Pumps

The buyer’s guide below examines several types of pool pumps and the qualities to look for when selecting the best pump for your pool.

Pump Types

Above-ground pool pumps are less expensive than in-ground pumps because they are simpler. The water is pumped via an above-ground system that depends on gravity and a flooded suction and pressure system. To be effective, the pump must be situated near to the pool, far below the waterline.

Self-priming in-ground pool pumps are situated above the waterline and are self-priming. They are often bigger and designed to handle higher flow rates and bigger amounts of water.

RELATED: The Best Robotic Pool Cleaners

Optional Speeds

Single speed

Single-speed pumps, on the other hand, pump water at a single consistent speed. They are inefficient, yet they are a low-cost choice, thus individuals may pay a low initial cost, but they will almost certainly have significant ongoing expenditures.

Dual speed

These pumps have two speeds: high and low. You have two speeds to pick from, one of which uses less energy and so saves you money.

Various Speeds

Some pumps allow you to choose the speed; they are often more costly, but they are also more energy-efficient and useful. They allow you to customize the flow rate according on your consumption and requirements.


  • Size – the volume of your pool and the pool pump’s compatibility are critical. The pump should be capable of handling the size of your pool. Calculate how long it would take the pump to clear all of the pool water by looking at the flow rate per hour.
  • Timer – a timer is a useful addition since it is a simple addition that may help you save time, energy, and money.
  • Efficiency – There are certain inefficient pump alternatives out there, and you should avoid them since they will wind up costing you more money in the long run. Pool pumps with high energy star ratings are more energy efficient and will help you save money on your pool’s operating costs.
  • Plumbing – Knowing how your pool’s plumbing works is vital before picking pool pumps since you’ll need to know the distances and other equipment installed. This will make it easier for you to install the pump you’ve chosen and also aid future adjustments.
  • Noise – some pumps make a loud buzzing noise that might be bothersome at night, while others are almost silent. To retain harmony with your family and neighbors, go for a pump that is quiet.
  • Compatibility – Consider how your pump will interface with other equipment, such as a sand filter. Sand filters are an important part of your pool system because they keep the water clear of particles.

Frequently Asked Questions about Pool Pumps

When should my pool pump be replaced?

Most pool pumps need to be changed after 8-12 years of steady use. If your pump is nearing the end of its functional life or exhibiting symptoms of wear and tear, it’s time to replace it.

How much horsepower do I require for a pool pump?

It’s advisable to consider the pump’s water flow (gallons per minute) rather than horsepower, however as a general rule, a 1HP pump is acceptable for an above-ground round pool with up to 15,300 gallons of water, while a 1.5HP pump is good for pools with more than 15,300 gallons of water.